FTTH ONU EPON And GPON Mode Automatically Switched FTTH ONT For
EPON GPON OLT
Model NO:JZ-CX0101R001
Main Features:
Supports Dual Mode (can access GPON/EPON OLT).
Supports SFU and HGU of EPON CTC 3.0 standard
Supports GPON G.984/G.988 standards
Support CATV interface for Video Service and remote control by
Major OLT
Support NAT, Firewall function.
Support Flow & Storm Control , Loop Detection, Port Forwarding and
Loop-Detect
Support port mode of VLAN configuration
Support LAN IP and DHCP Server configuration
Support WEB Management
Support Route PPPoE/IPoE/DHCP/Static IP and Bridge mixed mode
Support IPv4/IPv6 dual stack
Support IGMP transparent/snooping/proxy
In compliant with IEEE802.3ah standard
Compatible with popular OLT (HW, ZTE, FiberHome...)
Technical Parameters:
| Technical Item | Details |
| PON interface | 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nm SC/APC connector Receiving sensitivity: ≤-27dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM |
| LAN interface | 10/100/1000Mbps auto adaptive Ethernet interfaces. 10/100/1000M Full/Half, RJ45 connector |
| CATV Interface | RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input) AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm MER: ≥32dB(-14dBm optical input), ＞35(-10dBm) |
| LED | 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN |
| Push-Button | 2, for Function of Power on/off, Reset |
| Operating condition | Temperature : 0℃～50℃ Humidity :10%～90%(non-condensing) |
| Storing Condition | Temperature : -40℃～+60℃ Humidity :10%～90%(non-condensing) |
| Power supply | DC 12V/1A |
| Power Consumption | <3W |
| Net Weight | <0.2kg |
Panel LED Indicator:
| Pilot | Status | Description |
| POWER | On | The device is powered up. |
| Off | The device is powered down. |
| LOS | Blink | The device doses not receive optical signals. |
| Off | The device has received optical signal. |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. |
| Off | The device registration is incorrect. |
| LAN | On | Port is connected properly (LINK). |
| Blink | Port is sending or/and receiving data (ACT). |
| Off | Port connection exception or not connected. |
| NORMAL | On | Input optical power is between -18dBm and 2dBm |
| Off | Input optical power is higher than 2dBm or lower than -18dBm |
| WARN | On | Input optical power is higher than 2dBm or lower than -18dBm |
| Off | Input optical power is between -18dBm and 2dBm |
Applications:
Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Service:Broadband Internet access, IPTV, VOD, CATV and
Video Surveillance.
